Oil mist detector is a device used to monitor the mist like substances produced by flammable liquids such as petroleum and liquefied gas. It can detect fire hazards in the early stages and take timely measures to avoid accidents. However, during installation, it is important to pay attention to some important requirements to ensure that they can play their maximum role.

Several important requirements for the installation position of oil mist detectors:

1. Far enough from the combustion source

It should be installed near the combustion source but far enough away from the combustion source. This ensures that in the event of a fire, the detector will not be directly destroyed by flames or disturbed by combustion products. According to different application scenarios, it is usually recommended to install it within a range of 2-5 meters around the combustion source.

2. Suitable installation height

The installation height is also very important. If installed too low, it may be artificially damaged or obstructed by objects, thereby affecting its detection ability. If installed too high, it may not be possible to detect the generated oil mist or fire hazards in a timely manner. Generally speaking, it is recommended to install it indoors at a height of 2-3 meters from the ceiling to the ground.

3. Avoid obstruction

The installation position should avoid being obstructed by other objects. For example, do not install the detector near columns, pipelines, or other equipment, as these locations may hinder the detector from monitoring the state of the air around the combustion source. In addition, it should also be avoided to install the detector in strong winds or air vents, as this may slow down the diffusion speed of oil mist, thereby delaying the reaction time of the detector.

4. Stable installation position

It should be installed in a stable position to ensure stable and reliable operation. During the installation process, the detector must be fixed in the predetermined position using sturdy brackets or other fixing devices. This can avoid displacement or damage to the detector position due to vibration, impact, or other factors.

5. Full coverage monitoring area

During installation, it is necessary to ensure that it can fully cover and monitor areas where fires may occur. For example, around furnaces, boilers, or mechanical equipment, a sufficient number of detectors should be installed to ensure that they can simultaneously monitor the oil mist situation in the entire area.

In summary, the installation position of the oil mist detector is crucial. The installation position should be far enough from the combustion source, at a suitable height, without obstruction, stable and reliable, and able to cover the entire monitoring area. Only by following these requirements can oil mist detection be achieved.

笔记